Maintenance

• Recommendable keeping conditions : less than 300 c, RH 40 - 60%.
• To avoid scratches on the surface, remove the protective film after PSDP has been machined.
• lt is recommendable to have trials with test specimens to determine optimum settings before cutting or modification.
• Static dissipative coating must be removed from the surface to be glued.
• lsopropyl alcohol (lPA) and alcohol based cleaning liquid are recommendable for cleaning.
• PSDP is not required to be cleaned with antistatic plastic cleaners.
• Loss of static dissipative performance will occur if excess scratching is concentrated in a particular area.
• lf PSDP is treated with a polishing machine, the permanence of static dissipative coating cannot be guaranteed.